15 Nov
|
Connect Resources
|
Gold Coast
15 Nov
Connect Resources
Gold Coast
Connect Resources QLD is looking for an experienced GPS Final Trim Excavator Operator for a clay capping project on a contaminated site in Bundaberg, starting Monday 9 November.
About the role We’re after an operator with solid GPS experience to run a 24T excavator on a project placing a 500mm clay cap over a contaminated site. The cap and excavation levels change across the site, so you’ll need to be confident working to different design levels and trimming accurately to grade. Accuracy matters on this job, so we want someone who takes pride in a clean, accurate finish.
Key responsibilities
Operate a 24T excavator fitted with GPS machine control
Excavate down to varying design levels across the site
Place, spread, and trim the 500mm clay cap to the correct levels, with different cap levels in different areas
Work from design surfaces and 3D models loaded in the GPS system, checking levels against the plans and surveyors’ marks
Carry out final trim work to tight tolerances
Work with dump trucks, rollers, and other plant to keep material moving
Follow the site’s environmental management plan, including keeping contaminated and clean material separate and following decontamination procedures
Complete daily pre-starts, basic maintenance, and fault reporting
Follow all site safety, induction, and PPE requirements
Job title: GPS Final Trim Excavator Operator (24T): Clay Capping, Bundaberg
Connect Resources QLD is looking for an experienced GPS Final Trim Excavator Operator for a clay capping project on a contaminated site in Bundaberg, starting Monday 9 November.
About the role We’re after an operator with solid GPS experience to run a 24T excavator on a project placing a 500mm clay cap over a contaminated site. The cap and excavation levels change across the site, so you’ll need to be confident working to different design levels and trimming accurately to grade.
Accuracy matters on this job, so we want someone who takes pride in a clean, precise finish.
Key responsibilities
Operate a 24T excavator fitted with GPS machine control
Excavate down to varying design levels across the site
Place, spread, and trim the 500mm clay cap to the correct levels, with different cap levels in different areas
Work from design surfaces and 3D models loaded in the GPS system, checking levels against the plans and surveyors’ marks
Carry out final trim work to tight tolerances
Work with dump trucks, rollers, and other plant to keep material moving
Follow the site’s environmental management plan, including keeping contaminated and clean material separate and following decontamination procedures
Complete daily pre-starts, basic maintenance, and fault reporting
Follow all site safety, induction, and PPE requirements
About you
Proven experience operating excavators with GPS machine control (Trimble, Topcon, or Leica)
Experience in final trim and working to design levels
Relevant RII excavator ticket or VOC
Construction White Card
Able to work accurately and independently, and comfortable working to a plan and with a survey crew
Reliable, safety-focused, and comfortable working to site environmental controls
Desirable
Previous experience on contaminated sites, capping, or remediation works
Experience placing and trimming clay or other engineered fill
Any additional site-specific tickets or inductions
What we offer
$49.24 to $52.00 per hour , plus penalties
Travel allowance and meal allowance
Immediate start, Monday 9 November
Site located in Bundaberg
Ongoing project - overtime opportunities
Work through Connect Resources QLD with a reputable civil client
Additional information
Hourly Rate $49.24 - $52.00 plus penalties & allowances
Immediate start | Ongoing project
Plenty of overtime opportunities
📌 GPS & Final Trim Excavator Operators (Gold Coast)
🏢 Connect Resources
📍 Gold Coast