Position Description – Labourer (Construction)
Authorised by: Martin Leech Chief Executive Officer Dated: 27 October 2026

Position Vacant

Labourer/Crew Member

(Construction)

CASUAL POSITIONS

At the Paroo Shire Council, we believe that our success starts with our people.

We are committed to creating a positive, inclusive, and rewarding work environment where team members feel supported
and valued.

As the Labourer/Crew Member (Construction), you will undertake general labouring, construction and
maintenance activities across Council worksites, helping deliver safe, practical and high-quality services to the
community.

The position supports Council construction and maintenance crews through manual tasks, road and drainage
works, bitumen patching, concreting, paving, site preparation, cleaning and other assigned duties. You will
operate vehicles, hand tools and small plant within your training and competency, follow supervisor directions
and contribute to safe, efficient teamwork.

An immediate start is on offer. If you are seeking a genuine opportunity to make a meaningful contribution and
would like to become a valued member of the Paroo Shire Council team, please submit a cover letter and your
current CV for consideration.

If you would like further information, please contact:
Recruitment on 07 4655 8400.

You can email your interest directly to Recruitment at [email protected]

Alternatively, download the information directly from our website at

Employment Vacancies – Paroo Shire Council

Position Description – Labourer (Construction)
Authorised by: Martin Leech Chief Executive Officer Dated: 27 October 2026

POSITION DESCRIPTION

LABOURER/CREW MEMBER

(CONSTRUCTION)

Position Number: 751 Location: Cunnamulla

Award: Queensland Local Government Industry Award (Stream B) – State 2017

Certified Agreement: Paroo Shire Council – Operational Staff Certified Agreement 2025–2028

Classification Level: Level 2 Employment Type: Permanent Full Time

Department / Team: Infrastructure / Operations

Reports to: Construction Supervisor Supervises: Nil

Our Values

In making and implementing our decisions, we will be guided by the principles of integrity, efficiency and
continuous improvement and exhibit the following core values:

Pride, Accountability, Respect, Open & Transparent, Opportunities for Employment,
Safety and Commitment

Position Objectives
As the Labourer / Crew Member (Construction), you will undertake general labouring, civil construction and
maintenance activities across Council worksites, completing assigned tasks safely, efficiently and to the required
standard.
Working under the direction of the Construction Supervisor and relevant site supervisors, the position supports
road and drainage works, bitumen patching, paving, concreting, site upkeep and other operational activities. The
role operates appropriate vehicles, hand tools and plant within the employee’s training, licences and
demonstrated competency.
The role is predominantly field-based and physically active, including outdoor work in varying weather and remote
Shire conditions. The employee follows approved work instructions, reports hazards and defects promptly, and
works collaboratively to achieve work quality, program and safety requirements.

Key Responsibilities




• Undertake general labouring duties and complete assigned construction and maintenance tasks safely, on time

and to the required standard.

- Assist with road and drainage construction and maintenance, including site preparation, excavation support,

pavement repairs, bitumen patching, shoulder works and clean-up.

- Assist with concreting, kerb and footpath works, paving, placement of materials, minor civil repairs and other

construction activities as directed.

- Carry out manual handling, loading and unloading, rubbish collection, street sweeping, vegetation

management, lawn maintenance and gardening as required.

- Operate Council vehicles, hand tools, power tools and small plant only where appropriately licensed, trained,

competent and authorised.

- Carry out pre-start checks, routine cleaning and basic care of allocated tools, vehicles, plant and equipment;

report faults, defects and damage promptly.

Position Description – Labourer (Construction)
Authorised by: Martin Leech Chief Executive Officer Dated: 27 October 2026

- Follow directions from the Construction Supervisor and site supervisors, including approved plans,

specifications, work instructions and safe work procedures.
- Complete required safety documentation, including plant pre-starts, Safe Work Method Statements (SWMS),

standard operating procedures (SOPs), risk assessments, JSAs, Take 5s and hazard reports.
- Apply safe manual handling practices, required personal protective equipment, traffic management controls

and environmental protection measures at worksites.
- Identify and promptly report hazards, incidents, unsafe conditions, defective equipment and work quality

concerns; participate in corrective actions within authority.
- Work collaboratively with supervisors, plant operators, other crew members and contractors to achieve the

required quality, productivity and safe outcomes.
- Be punctual, fit for duty and reliable; communicate progress, delays, issues and resource needs promptly to

the supervising officer.
- Participate in toolbox talks, WHS consultation, pre-start meetings, training and continuous improvement

activities.
- Assist with site set-up, traffic control support (where appropriately accredited), barricading, housekeeping and

reinstatement of work areas.
- Undertake work across different Council operational activities and locations as reasonably directed, within the

employee’s skills, training and competency.

Qualifications, Skills, and Experience

Essential

- Legal right to live and work in Australia.
- Current ‘C’ Class Queensland Driver’s Licence or higher.
- Construction Induction Card (White Card).
- Ability to meet relevant pre-employment health assessment and National Police Check requirements.
- Demonstrated ability to undertake physical outdoor labouring and to use and care for appropriate hand tools,

vehicles and equipment safely.

- Ability to understand, follow and carry out verbal and written instructions, approved work methods and safety

procedures.

- Demonstrated reliability, punctuality, accountability, teamwork and a strong work ethic,



with willingness to

learn and take ownership of allocated tasks.

- Ability to work flexibly to meet operational needs, including with minimal supervision when appropriate, and

willingness to work at sites across the Shire.

Desirable
• Relevant plant competencies, licences or experience (e.g. backhoe, front-end loader, skid steer, excavator,

roller, grader or forklift).

- Current ‘HR’ Class Queensland Driver’s Licence.
- Traffic control accreditation or traffic management experience, and/or previous experience in civil

construction or road maintenance.

Corporate Accountabilities
• Demonstrated commitment to complying with Council’s policies and procedures and the Local Government

Act 2009, including but not limited to Council’s Code of Conduct, Work Health and Safety Policy and Anti-
Discrimination Policy.

- Ability to carry out the physical and inherent requirements of the position and to remain flexible and adaptable

to meet the requirements of the role.
- Maintain a positive team culture based on honesty, trust, and integrity.

- Perform jobs, tasks, and processes in accordance with relevant guidelines and standards.
- Maintain confidentiality of Council information obtained during the course of employment.

Position Description – Labourer (Construction)
Authorised by: Martin Leech Chief Executive Officer Dated: 27 October 2026

- Operate and maintain Council assets, including equipment, plant and fleet, in accordance with Council

guidelines and manufacturers’ specifications.
- Foster and maintain strong stakeholder relationships directly or indirectly associated with Council.
- Provide consistent and timely customer service to colleagues and communities.

Work Health and Safety
• Apply Council policies and procedures in everyday work activities to help ensure a safe work environment and

comply with the requirements of the Work Health and Safety Act 2011 (Qld) and other relevant safety
legislation.

- Maintain an understanding of work health and safety (WHS) legislation and Council’s WHS policies and

procedures, and foster a positive attitude towards WHS within work teams.

Team Contribution
As part of a cooperative operational team, the incumbent is expected to contribute to safe, reliable delivery of
Council works and provide respectful service to colleagues and members of the community.
You will also:
• Work collaboratively with co-workers, actively contributing to the Shire’s vision and values.

- Raise issues with a solution-focused approach and contribute to a positive working environment.
- Build professional relationships with stakeholders at every level of the Shire.
- Actively display the values of the Shire in every interaction.
- Attend and participate in staff/team meetings and workshops as required.
- Participate in relevant training and development, maintain current safety and operational competencies, and

contribute to teamwork, practical improvement and continuous learning.
Agility Statement
The information contained in this position description is intended to describe the nature and level of work to be
performed. It is not an exhaustive list of the responsibilities, duties or skills required for the role. This position
description may change from time to time. Any reorganisation of duties will be discussed with the position
incumbent.

📌 Labourer/Crew Member (Queensland)
🏢 Paroo Shire Council
📍 Queensland